Standard Features Include:
技術特點： 
 
Constructed  from  all  white  stress  relieved,  acid  resistant,  non-corrosive  “semiplastic”
polypropylene. All heat seam welded construction and tested. 
       柜體*采用中國臺灣*“semiplastic”（瓷白色聚丙烯）PP 板材制作，具有的耐酸堿性，經無縫焊接測試完成。 
 
      Specific material selection for use with harsh corrosive acids and trace metal analogy. 
      苛刻的用料保證其可以抵抗嚴苛的酸堿環境。

    System includes ergonomic-sloping front design for easy access & cleaning.
人體工程學應用其中，保證操作的輕松及清潔的便捷。 
 
The  work  top  is  constructed  from  6-12mm  thick  polypropylene.  The  front  of  the  unit  will incorporate a raised front lip for spill containment with airfoil.
操作面為 6-12mm厚聚丙烯板材加工制作，前端做突起設計，防止可能的濺漏。 
 
Below the work top is room to allow for storage space. This storage space is accessed via sliding doors in front and internally removable panels in the rear. （can be vented to exhaust duct）
操作面下部設置儲藏空間。可應用拉門或滑門設計，并加裝內置抽屜。（可與排風管連接做負壓設計） 
 
Counter-weighted, abrasion resistant, clear polymethylmethcrylate （pmma） front sash, vertically gliding, fitted with sash stops.
垂直調節視窗裝備透明 pmma 有機玻璃，精確的配重使其可以輕松滑動，精準靜止于任何高度。 
 
Incorporates a rear baffle and internal ceiling panel to promote horizontal air flow.
擁有高精度內部后導流板設計保證氣流均勻、*、無逆流。上部倒流板角度設計保證zui小的渦流發生、降低噪音。堅決保護您的安全。 
 
A valve panel has been incorporated for mounting of remote valves and services when required   and is located just below the spill containment lip.
控制面板位于操作面下部，可根據實際需求加裝各類遙控閥門以及電器設備。 
 
The storage cabinet can be vented to main plenum。
下部儲物空間可做負壓設計，防止氣體外溢。 
 
Supplied with a fluorescent light fixture in an all-polypropylene compartment,
all welded with a polypropylene lens with all plastic hardware.
照明設備為聚丙烯材質外殼內置熒光燈，由同材質聚丙烯焊條無封焊接。 
 
A sealed light switch/circuit breaker operates the light and is located above the hinged sash.
斷路器保護下的密封防化燈保證柜內任何角度至少 80 尺燭光照明亮度。充分滿足應用需要，保護您的安全以及舒適。 
 
Top-located exhaust collar（s） allows for customer connection.
排風管已位于通風柜頂端，以供日后與總風道連接。 
 
Located on the top or back, is a junction box to allow for electrical connection.
接線盒位于頂部或者后部，以供日后維修以及接線。 
 
Configured for 100 VAC, 50 Hz or 220 VAC, 50 Hz electrical access （preference requested）.
電源為  100 VAC，50 Hz  或  220VAC，50 Hz （根據需求選擇）。 

   柜體尺寸：756mm（深）X864mm（高），寬度可根據現場尺寸定制。

    Shipped assembled, fully tested and ready to use. 
    一切就緒，恭候您的使用。