一.手臂結構Arm structure

1. 手臂結構分：單/雙節式手臂，雙節手臂采用特殊設計的皮帶倍速機構，，縮短了上下手臂的結構高度，適配廠房高度較低之場所。
   

2. 左右旋轉結構，方便調整置物方向。

3. 夾具旋轉機構，可以旋轉90°放置成品及水口。

4. 換模調整機構，換模時僅需將固定把手松開，全機可旋轉90°。

5. 全機采用鋁合金精密鑄造，搭配精密加工，整機穩固可以承受高速運動，耐久使用。

6. 上下手臂采用高剛性線性滑軌，能達到取出速度快、高效能、高精度、使用壽命長的要求。

1. Arm structure: single/double arm, double arm adopts specially designed belt-doubling mechanism, which shortens the structural height of upper and lower arm, suitable for the place where the height of factory is lower.

2. Left and right rotating structure, easy to adjust the orientation of the objects.
   

3. Fixture rotating mechanism, can rotate 90° to place the finished product and nozzle.
   

4. Mold changing adjustment mechanism, when mold changing, just loosen the fixed handle, the whole machine can rotate 90°.
   

5. The whole machine USES aluminum alloy precision casting, with precision processing, the whole machine is stable and can withstａnd high-speed movement, durable use.
   

6. The upper and lower arms adopt high rigid linear sliding track, which can meet the requirements of fast removal speed, high efficiency, high precision and long service life.